Video thumbnail

APS 206 Labeler

Product Variants

APS 208

APS 208

APS 216

APS 216

APS 218

APS 218

APS 228

APS 228

The APS-206 is a zero-downtime labeler with two label heads on the same side to allow the operator to change one roll of labels without stopping the line.

APS-206 can handle up to 6” tall labels and switches to the second label head when the first label head runs out of labels. Labels can be loaded on the first label head without stopping the machine.

The APS-206’s speed, versatility, and reliability exceed competing labelers at a fraction of the price. It can apply labels to plastic, metal, fiber, and glass containers of various shapes.

Contact Accutek today to learn more about this machine.

Recommended Products

Round containers
Square containers
Indented containers

Is the touchscreen interface easy to use?

Yes, the touchscreen interface is easy to navigate. It may not be immediately obvious which buttons are supposed to do what, but the manual will go over all of this with you. After reading it, you’ll have the know-how and confidence to carry out the labeling of your product(s).

How am I supposed to mount my label reel onto the machine?

You start by setting a roll of labels on the supply reel, then pulling about five feet of labels from the roll to form a leader. Then you peel the labels off the ladder and lace it through the guide rollers, label sensor, and around the peel plate. The rest of how to mount your label is described in the machine’s manual.

What should I do if I have a problem with the machine?

The machine’s interface contains a built-in section on troubleshooting problems that you may encounter when operating this machine. If the suggested solutions don’t work or the problem is outside its covered scope, then contact Accutek’s service department. We’ll do our best to help you solve your problem.

How often should I clean and maintain my machine?

That will depend on how often you use it. We do recommend cleaning the APS once you receive it, just to make sure any residue from transport is removed.

Labeling Speed: Up to 175 CPM
Label Length: 0.5” – 22” (1.27 – 55.88 cm)
Label Height: 0.75” – 7.75” (1.91 – 19.69 cm)
Labeling Direction: Left side off – outside peel
Electrical: 110 VAC – 10 APMS, 56/60 Hz (220 VAC optional)
Height: 53” (134.62 cm)
Length: 79” (200.66 cm)
Width: 45” (114.3 cm)
Weight: ~575 lbs. (260.82 kg)

Two label heads
Tamp station
Synchronized top-down hold-down belt
Auto Label Learn™ (automatic label setup)
Label heads dispense up to 6” (15.24 cm) tall labels
Touchscreen control system with job memory
Heavy-duty construction for three-shift operations
Sanitary stainless-steel frame
Easy-to-operate hand wheels for quick setup
Conveyor with eight different speed selections
Label dispensing tracks conveyor speed changes with optical container sensing
Height-adjustable
Maximum roll diameter of 13.5″ (34.29 cm)

Hot-stamp coder for date or lot printing
Alphanumeric starter kit hot stamp coder
Tiltable peel plates for labeling conical bottles
Clear label sensor
Casters

Not sure which machine works best?

Contact Us