(760) 734-4177
Case Erector
Accutek’s Case Erector automatically forms cartons for use. An investment in this support equipment can pay off in the short term by reducing labor costs and improving productivity. It takes a flat cardboard loaded in a stack and forms it, with the top left area open to place products inside.
It can form boxes from 20~50 cm in length, 20~46 cm in width, and 20~40 cm in height. This machine can make 6-10 cartons/min. It uses tape that is 1.88” wide, or 2.36”-2.95” in width, and 39.37” in length.
Contact Accutek Packaging Equipment Company, Inc. today to learn more about this machine.
Disclaimer: The dimensions and weights are estimates of the standard equipment. Any customizations or modifications made to the machine may alter this information.
Recommended Products
- Boxes
- Cases
How is this machine controlled?
Is the touchscreen interface easy to use?
What should I do if the machine malfunctions?
- Sealing Speed: 6-18 cartons/min
- Power Source: 110V/50/60HZ
- Air: 6-7kgf/cm, flow rate 40 nl/min
- Use Tape:
- Width: 48 mm-75 mm
- Length: 1000 mm
- Machine Dimensions:
- Length: 82.67” (210 cm)
- Width: 78.74” (200 cm)
- Height: 55.11” (140 cm)
- Weight: 771.62 lbs (350 kg)
- Carton Dimensions:
- Length: 7.87”~19.68” (20~50 cm)
- Width: 7.87”~18.11” (20~46 cm)
- Height: 7.87”~15.74” (20~40 cm)
- Table Height: 23.62” (60 cm)
Related products
Cotton Inserter
Accutek’s Cotton Inserter is a sleek machine that can be used as either a standalone unit or as part of an integrated line alongside bottle feeders, counters, cappers, and more. It automatically loads strips of cotton into containers, pulling, cutting, and feeding the cotton into an inserting guide rail via a continuously rotating DC motor.
Cotton Inserter
Accutek’s Cotton Inserter is a sleek machine that can be used as either a standalone unit or as part of an integrated line alongside bottle feeders, counters, cappers, and more. It automatically loads strips of cotton into containers, pulling, cutting, and feeding the cotton into an inserting guide rail via a continuously rotating DC motor.
AccuTorque Digital
This support equipment AccuTorque Tester Digital (ATT-D) is a dual direction, digital torque tester that measures 0-100 inch pounds (.1 inch pound increments) in application and removal torque.
AccuTorque Digital
This support equipment AccuTorque Tester Digital (ATT-D) is a dual direction, digital torque tester that measures 0-100 inch pounds (.1 inch pound increments) in application and removal torque.
Case Taper
For material handling taping boxes closed while minimizing wasted tape would be easier and faster if there was a way to automate the task.
Case Taper
For material handling taping boxes closed while minimizing wasted tape would be easier and faster if there was a way to automate the task.
