The spring torque tester is ruggedly built and should give long service without maintenance or repair. None of the enclosed parts require oiling. An occasional drop of oil on the screw thread of the chuck will keep it operating smoothly.
The spring torque tester is ruggedly built and should give long service without maintenance or repair. None of the enclosed parts require oiling. An occasional drop of oil on the screw thread of the chuck will keep it operating smoothly.
Three models are available- Model 25, reading from 0 inch lb. To 25 inch lb. or Newton meters, is suitable for closures of 15mm to 38mm size, graduations are in 1 inch lb. increments. Model 50, graduated to 50 inch lb. or Newton meters, is particularly suited for continuous caps 38 to 58mm sizes and all sizes of lug caps; graduations are in 2 inch lb. increments and Model 100, graduated to 100 inch lbs. or Newton meters is intended generally for closures 38mm and larger. Graduations are in 5 inch lbs. increments.
Torque Range: | 0-100 in. lb. |
height: | 5 |
length: | 16 |
width: | 8 |
weight: | Approx: 5 lbs. (2.26 kg) |
Headquarters
2980 Scott St, Vista, CA 92081
Phone: (760) 734-4177
Fax: (760) 734-4188
Open: 8:00 am – 4:30 pm
Texas
8051 Jetstar Dr #175 Irving, TX 75063
Phone: (972) 915-6888
Fax: (972) 915-6999
Open: 8:00 am – 4:30 pm
Florida
14231 Jetport Loop. #1 Fort Myers, FL 33913
Phone: (239) 225-4020
Fax: (239) 225-4024
Open: 8:00 am – 4:30 pm